Planex BLW-54PM User Manual page 29

Data - Services Screen
Available Services
Available Services
"Delete" button
Add New Service
Name
Type
Start Port
Finish Port
ICMP Type
Buttons
Delete
Save
Cancel
Figure 14: Access Control - Services
This lists all the available services.
Use this to delete any Service you have added. Pre-defined Services
can not be deleted.
Enter a descriptive name to identify this service.
Select the protocol (TCP, UDP, ICMP) used to the remote system or
service.
For TCP and UDP Services, enter the beginning of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the Start and Finish fields.
For TCP and UDP Services, enter the end of the range of port
numbers used by the service. If the service uses a single port number,
enter it in both the Start and Finish fields.
For ICMP Services, enter the type number of the required service.
Delete the selected service from the list.
Add a new entry to the Service list, using the data shown in the Add
New Service area on screen.
Clear the Add New Service area, ready for entering data for a new
29