Defining Your Own Virtual Servers; Connecting To The Virtual Servers - Planex BLW-54PM User Manual

Buttons
Defaults
Disable All
Update Selected
Server
Add as new Server
Delete
Clear Form
Note:
For each entry, the PC must be running the appropriate Server software.

4.5.3 Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define
and manage your own Servers:
Create a new Server:
Modify (Edit) a Server:
Delete a Server:
Note:
From the Internet, ALL Virtual Servers have the IP Address allocated by your ISP.

4.5.4 Connecting to the Virtual Servers

This will delete any Servers you have defined, and set the pre-
defined Servers to use their default port numbers.
This will cause the Enable setting of all Virtual Servers to be set
OFF.
Update the current Virtual Server entry, using the data shown in the
Properties area on screen.
Add a new entry to the Virtual Server list, using the data shown in
the Properties area on screen. The entry selected in the list is
ignored, and has no effect.
Delete the current Virtual Server entry. Note that the pre-defined
Servers can not be deleted. Only Servers you have defined yourself
can be deleted.
Clear all data from the Properties area, ready for input of a new
Virtual Server entry.
1. Click Clear Form
2. Enter the required data, as described above.
Click Add.
3.
4. The new Server will now appear in the list.
1. Select the desired Server from the list
2. Make any desired changes (for example, change the
Enable/Disable setting).
Click Update to save changes to the selected Server.
3.
1. Select the entry from the list.
Click Delete.
2.
Note:
You can only delete Servers you have defined. Pre-
defined Server cannot be deleted.
39