Password Screen - Planex BLW-54PM User Manual

•
Keys
•
•
Passphrase
Enter a word or group of printable characters in the Passphrase box and
click the Generate button to automatically configure the WEP Key(s).
If encryption strength is set to 64 bit, then each of the four key fields
will be populated with key values. If encryption strength is set to 128
bit, then only the selected WEP key field will be given a key value.
WPA-PSK
Enter the Keyword key value. Data is encrypted using a key derived
PSK
from the network key. Other Wireless Stations must use the same
network key. The PSK must be from 8 to 63 characters in length.
This determines how often the encryption key is changed. Enter the
Key Lifetime
desired value.
Select the desired option. Wireless Stations must use the same method.
WPA Encryption
Buttons
Save Save the data on screen.
Cancel The Cancel button will discard any data you have entered since the last
Save operation.

3.6 Password Screen

The password screen allows you to assign a password to the BLW-54PM.
Once you have assigned a password to the BLW-54PM (on the Password screen above) you
will be prompted for the password when you connect, as shown below. (If no password has
been set, this dialog will not appear.)
22
Use the radio buttons to select the default key.
Enter the key value you wish to use. Other stations must have the
same key values.
Keys must be entered in Hex. Hex characters are the digits ( 0 ~ 9 )
and the letters A ~ F.
Figure 9: Password Screen