Data - Special Applications Screen
Checkbox
Use this to Enable or Disable this Special Application as required.
Name
Enter a descriptive name to identify this Special Application.
•
Type - Select the protocol (TCP or UDP) used when you receive data
Incoming
from the special application or service.
Ports
different protocols for outgoing and incoming data).
•
Start - Enter the beginning of the range of port numbers used by the
application server, for data you receive. If the application uses a single
port number, enter it in both the Start and Finish fields.
•
Finish - Enter the end of the range of port numbers used by the
application server, for data you receive.
•
Type - Select the protocol (TCP or UDP) used when you send data to
Outgoing
the remote system or service.
Ports
•
Start - Enter the beginning of the range of port numbers used by the
application server, for data you send to it. If the application uses a single
port number, enter it in both the Start and Finish fields.
•
Finish - Enter the end of the range of port numbers used by the
application server, for data you send to it. If the application uses a single
port number, enter it in both the Start and Finish fields.
34
Figure 17: Special Applications Screen
(Note:
Some applications use