Table of Contents
Advertisement
Chapter 4 LAN Side Configuration
This chapter describes how to configure the LAN-side parameters of the product.
4.1 IP Address Configuration
This section describes how to verify and modify IP address of LAN port(s) on the product.
Caution:
Please be sure to assign a valid IP address to the product. Assigning an incorrect or
invalid address to it may result in failure to connect to the Internet.
4.1.1 Verifying and modifying LAN port IP address
The factory default LAN port IP address of the product is 192.168.1.1. Follow the steps
below tf you need to assign another IP address to the LAN port (ex. the product is installed
in an existing LAN, etc).
1. Click on [Network Connections] icon on the side bar.
2. Click on the
button for [LAN Ethernet].
30
Advertisement
Table of Contents
