Planex BLW-54PM User Manual page 9

Power Port Connect the supplied power adapter here.
LAN Port
Use standard LAN cables (RJ45 connectors) to connect your PCs to
(10/100BaseT)
these ports.
If required, any port can be connected to another hub. Any LAN port
will automatically function as an "Uplink" port when necessary.
WAN Port
Connect the DSL or Cable Modem here. If your modem came with a
(10/100BaseT) cable, use the supplied cable. Otherwise, use a standard LAN cable.
Reset Button
This button has two (2) functions:
•
•
To Clear All Data and restore the factory default values:
1.
2.
3.
4.
Reboot. When pressed and released, the BLW-54PM will
reboot (restart).
Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
Power Off.
Hold the Reset Button down while you Power On.
Keep holding the Reset Button for a few seconds, until the RED
LED has flashed TWICE.
Release the Reset Button. The BLW-54PM is now using the
factory default values.
9