Wan Configuration - Planex BLW–HPMM–U User Manual

DHCP Server Status DHCP stands for Dynamic Host Control
2
Protocol. BLW-HPMM-U Wireless Broadband Router has a built-in
DHCP server which can automatically assign an IP address to those
computers on the LAN/private network. Click the check box to enable
DHCP server.
DHCP Server IP Pool Start IP The first IP address which DHCP
server of BLW-HPMM-U starts to distribute.
DHCP Server IP Pool End IP The last IP address which DHCP
server of BLW-HPMM-U distributes.
Reset If there is anything wrong with the settings, you can click
Reset to configure the page again.
Cancel If you do not want to configure the settings now, you may
click this button to exit the setup wizard page.

3.5 WAN Configuration

The followings are the most common used connection types: Static IP,
PPPoE, and DHCP (Cable Modem). If you want to know more about
the other types of WAN configurations, please refer to NETWORK
configuration page.
Static IP
1.If you have already had a Static IP address, you can choose this entry and
use the wizard to configure.
18
BLW-HPMM-U