Chapter 2 Installation; Requirements; Procedure - Planex BLW-54PM User Manual

This Chapter covers the physical installation of the BLW-54PM.

2.1 Requirements

•
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
•
TCP/IP protocol must be installed on all PCs.
•
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable
modem (for WAN port usage)
•
To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b or IEEE802.11g specifications.

2.2 Procedure

UTP Cable
2.2.1. Choose an Installation Site
Select a suitable place on the network to install the BLW-54PM.
Ensure the BLW-54PM and the DSL/Cable modem are powered OFF.
10
DSL/Cable
Modem
To PCs
Figure 4: Installation Diagram
BLW-54PM