Planex BLW-54PM User Manual page 20

Options
Mode Select the desired mode:
•
•
•
Channel No.
This selection determines which operating frequency will be used. The
channel list changes according to the selected region.
Select the desired channel. Adjacent Access Points should use different
channels to avoid interference.
AutoLink
Auto Link is a new feature integrated in PCI GW-NS54GMZ that
offers users a simple way to configure a BLW-54PM in conjunction
with the Configuration Utility.
Broadcast SSID If Enabled, the SSID will broadcast its name to all Wireless Stations.
Stations which have no SSID (or a null value) can then adopt the
correct SSID for connections to this Access Point.
•
Current Setting
•
Access Point
•
Enable Access
Point
•
•
•
Allow LAN
access by ...
•
•
Allow Internet
access by ...
•
Buttons
Configure Click this button to view the Wireless Security sub-screen.
Select Stations Click this button to select the required PCs.
Save
Save the data on screen.
20
g & b - Both 802.11.g and 802.11b Wireless stations will be able
to use the BLW-54PM.
g only - Only 802.11g Wireless stations can use the BLW-54PM.
b only - Only 802.11b connections are available. 802.11g
Wireless Stations will only be able to use the BLW-54PM if they
are fully backward-compatible with the 802.11b standard.
Status - This will display Off, 64 Bit Encryption, 128 Bit
Encryption or WPA-PSK.
Configure - Click this button to access the Wireless Security sub-
screen.
If Enabled, wireless stations will be able to locate and use this
Access Point.
If Disabled, the wireless interface is disabled, and will neither
transmit nor receive wireless traffic.
The Wireless (WLAN) LED on the front panel will remain OFF if
the Wireless interface is disabled.
All Wireless Stations - All wireless stations can use the access
point to access your LAN.
Selected Wireless stations only - Only selected wireless stations
access your LAN. To select the required wireless stations, click the
Select Stations button.
All Wireless Stations - All wireless stations can use the access
point to access the Internet.
Selected Wireless stations only - Only selected wireless stations
use the access point to access the Internet. To select the required
wireless stations, click the Select Stations button.