Group Members Screen - Planex BLW-54PM User Manual

Internet Access
Restrictions
Block by Schedule
Define Schedule
Button
Services
Edit Service List
Button
Buttons
Members
Define Schedule
Edit Service List
Save
Cancel
View Log
Clear Log
Refresh

4.2.3 Group Members Screen

This screen is displayed when the Members button on the Access Control screen is clicked.
26
Select the desired options for the current group:
•
None - Nothing is blocked. Use this to create the least
restrictive group.
•
Block all Internet access - All traffic via the WAN port is
blocked. Use this to create the most restrictive group.
•
Block selected Services - You can select which Services are to
block. Use this to gain fine control over the Internet access for
a group.
If Internet access is being blocked, you can choose to apply the
blocking only during scheduled times. (If access is not blocked, no
Scheduling is possible, and this setting has no effect.)
Clicking this will open a sub-window where you can define or
modify the Schedule.
This lists all defined Services. Select the Services you wish to
block. To select multiple services, hold the CTRL key while
selecting. (On the Macintosh, hold the SHIFT key rather than
CTRL.)
If you wish to define additional Services, or manage the Service list,
click this button to open the Services screen.
Click this button to add or remove members from the current
Group.
If the current group is Default, then members can not be added or
deleted. This group contains PCs not allocated to any other group.
See the following section for details of the Group Members screen.
Click this to open a sub-window where you can define or modify
the Schedule.
If you wish to define additional Services, or manage the Service list,
click this button to open the Services screen.
Save the data on screen.
Reverse any changes made since the last Save.
Click this to open a sub-window where you can view the Access
Control log. This log shows attempted Internet accesses which
have been blocked by the Access Control feature.
Click this to clear and restart the Access Control log, making new
entries easier to read.
Update the data on screen.