Troubleshooting - Kodak DCS Pro 14n User Manual

Troubleshooting

Top Status LCD
Lo appears
—
buLb blinks
Shutter speed
indication blinks
—
Err blinks
C-2
Viewfinder
Lo appears Underexposure warning (subject is
too dark).
Electronic analog Subject brightness is beyond
exposure display camera's exposure range.
blinks
buLb blinks Shutter speed is set to buLb in S
mode.
125 appears Shutter speed faster than sync
speed is selected in S or M mode.
blinks for 3 Flash has fired at full output and
seconds after flash underexposure may have occurred.
Err blinks Malfunction detected.
Cause
In P mode, use flash.
In S mode, select a slower shutter
speed.
In A mode, select a larger aperture
(smaller f-number).
(If the warning indications remain
after trying the remedy in S or A
mode, use flash.)
When the subject is bright, use an
ND filter. When the subject is dark,
use flash. The electronic analog
exposure display blinks when the
Speedlight is used.
Cancel the buLb by selecting 30
seconds or faster shutter speed, or
select M mode to perform Long
Time exposure.
Release the shutter as it takes a
flash picture. Shutter speed
automatically shifts to 1/125
second.
Capture the image again after
confirming focus distance,
aperture, or flash shooting distance
range.
Release the shutter again. If the
warning indication remains, or this
warning appears frequently,
contact your camera dealer.
Remedy
April 29, 2004