Inserting A Memory Card; Setting Focus - Kodak DCS Pro 14n User Manual

Inserting a Memory Card

Setting Focus

April 29, 2004
3. Set the lens to its minimum aperture and lock.
1. Open the Media door.
2. Insert a CF card in the top slot. (The label should be up.)
NOTE: In Advanced mode (see
cards: a CF card in the top slot and either an SD or a MMC card in
the bottom slot.
3. Close the Media door.
1. Set the Focus Mode selector to S (Single Servo AF).
Be sure the Focus Mode selector clicks into position.
NOTE: Do not rotate the lens focus ring while the Focus mode is set to S.
2. Set the Exposure Mode dial to AF Area mode.
page 6-1) you can use either one or two
The Basics
4-3