Configuring your Camera
ISO
Setting ISO using the
Image LCD
5-20
ISO determines the sensitivity of the camera system to light. Increasing or
decreasing the ISO increases or decreases sensitivity.
The range of available ISO settings varies, depending on the image
resolution.
Resolution
13.5 MP (100%)
6.0 MP (67%)
3.4 MP (50%)
0.8 MP (25%)
You can change ISO settings in 1/3 stop increments using the
Main-Command dial. The factory default is 100.
You can set ISO using the Image LCD (see below) or using camera controls
(see
page
5-21).
1. Choose ISO from the Capture menu, then choose the desired setting.
2. Press the OK button.
Shortcut:
• You can also access this function using the Digital Status LCD shortcut
(see
page
2-15).
Range
80 - 400
80 - 800
80 - 800
80 - 800
April 29, 2004