Locking Focus - Kodak DCS Pro 14n User Manual

Locking Focus

April 29, 2004
Use Focus Lock to capture a subject that is framed outside of the five focus
areas and in situations where autofocus may not work as expected
(see page 8-8). Focus lock works differently in Single Servo AF and
Continuous Servo AF modes.
1. Position the focus area on the subject and lightly press the Shutter
Release button.
2. Confirm that the focus indicator
lock focus.
Single Servo AF:
• Focus is locked as long as you lightly press the Shutter Release
button.
• You can also lock focus by pressing the
Continuous Servo AF:
• While continuing to lightly press the Shutter Release button, press
the button.
• Focus is locked as long as you press the
remove your finger from the Shutter Release button.)
3. While keeping the focus locked, recompose and capture the image.
Tips:
After you have locked focus, do not change the camera-to-subject
distance.
If you keep the Shutter Release button lightly pressed or keep the
button pressed after releasing the shutter in Single Servo AF, the
shutter can be released repeatedly with the same focusing.
If the camera-to-subject distance changes after focus is locked,
release the Shutter Release button or
lock. Refocus and lock again.
Focusing
appears in the viewfinder and
button.
button. (You can
button to release the focus
8-7