Resetting Defaults; Time And Date - Kodak DCS Pro 14n User Manual

Configuring your Camera

Resetting Defaults

Time and Date

5-12
You can restore digital settings and camera settings to the factory defaults.
1. Choose Default Reset from the Tools menu, then highlight Digital
Settings, Camera Settings, or Both.
2. Press the OK button.
3. Press the OK button to accept the change and dismiss the
confirmation screen.
A time and date stamp is associated with each image file.
Inside your camera, a CR 2032 Coin Cell battery (see
the time and date for one to two years. If this battery loses its charge, you
must reset the time and date.
1. Choose Time/Date from the Tools menu, then choose Time or Date.
2. If you chose Time, press the right or left side of the Four-way switch to
select hours, minutes, or seconds. Press the top or bottom of the
Four-way switch to change the value.
If you chose Date, press the right or left side of the Four-way switch to
select year, month, or day. Press the top or bottom of the Four-way
switch to change the value.
3. Press the OK button.
page 3-6) maintains
April 29, 2004