Intervalometer - Kodak DCS Pro 14n User Manual

Intervalometer

April 29, 2004
The Intervalometer automatically captures a sequence of images at
specified intervals over a specified time period. You might use the
Intervalometer to capture a flower bud opening or for unattended
surveillance.
The Intervalometer is disabled automatically after the specified time
period, even if the specified number of images have not been captured. For
example, if you set the Intervalometer for 15 exposures at three second
intervals, the buffer fills after a few exposures, and the camera cannot
maintain the three second interval. The camera would stop capturing
images after 45 (15 x 3) seconds even though 15 images had not been
captured.
You can change the following Intervalometer settings:
Enable—Enable or disable the Intervalometer
Count—Number of images to be captured during the specified interval
Interval—Interval between exposures
Delay—Onset of the Intervalometer function
Configuring your Camera
5-15