Overexposure Indicator; Changing Display Contrast And Brightness - Kodak DCS Pro 14n User Manual

Working with Images on the Camera

Overexposure Indicator

Changing Display
Contrast and Brightness
11-8
You can indicate areas of overexposure in Single or Multiple Image Display
modes.
1. Choose Single or Multiple Image mode.
2. Choose Overexp. Indicator from the Review menu, then highlight Off
or On.
3. Press the OK button.
When the overexposure indicator is turned on, areas of overexposure
flash on and off.
You can change the contrast and lighten or darken the images displayed on
the Image LCD.
NOTE: Changing the contrast does not affect the stored images, only the
view of the images on the Image LCD.
1. Choose Single Image mode.
2. Choose Display Contrast from the Review menu.
3. Press the OK button.
A slider bar and a gray scale bar appear.
4. Press the top or bottom of the Four-way switch to move the slider bar
and lighten or darken the image.
Use the gray scale bar to evaluate the changed contrast.
April 29, 2004