Storing; Top And Back Status Lcds - Kodak DCS Pro 14n User Manual

Storing

Top and Back Status LCDs

April 29, 2004
Carefully check the camera's operation after lengthy storage, when the
camera has not been used for a long time, or before an important trip or
shooting assignment.
• When storing your camera, wrap it in a clean, soft cloth and place it in a
well-ventilated, cool, dry, dust-free place.
• Keep the camera out of direct sunlight and away from hot spots such as
the trunk or rear window shelf of a car.
• Avoid places where chemical agents such as moth balls are used.
• To prevent corrosion, avoid storing the camera in a laboratory or other
location where chemicals are used.
• Do not store the camera in a drawer or other non-ventilated place.
• Remove the battery if you do not expect to use the camera for several
days.
• Take the camera out and release the shutter occasionally to assure
camera function.
• In a humid environment, store the camera inside a vinyl bag with a
desiccant to keep out dust, moisture and salt.
IMPORTANT: A minute amount of battery power is used even when
the camera is turned off. This will affect the camera's
shooting capacity after several days of storage.
Liquid crystal may respond relatively slowly in temperatures below 32° F
(0° C). It may also darken in temperatures of around 140° F (60° C). The
LCD panels return to normal function when the temperature returns to
normal.
Camera Care
14-5