Using The Built-In Speedlight - Kodak DCS Pro 14n User Manual

Using the Built-in
Speedlight
April 29, 2004
Follow these instructions when using a G-type or D-type AF NIKKOR lens.
NOTE: Continuous Shooting Drive mode cannot be used in flash
photography.
1. Set the Metering system to Matrix or Center-Weighted metering.
2. Press the Flash Lock-Release button to release the Built-In Speedlight.
The Speedlight starts to charge when it is released.
viewfinder when it is fully charged.
NOTE: To conserve power when the Speedlight is not in use, close it by
pressing the Speedlight down gently until it clicks in place.
3. Press and hold
Flash Sync mode.
4. Set the Exposure mode and confirm shutter speed and aperture.
NOTE: Automatic Balanced Fill-Flash for Digital SLR is executed when you
set Exposure mode to Programmed Auto, Shutter-Priority Auto, or
Aperture-Priority Auto. Standard TTL Flash for Digital SLR is
executed when you set Exposure mode to Manual.
Flash Photography
and rotate the Main-Command dial to set the
appears in the
10-3