Kodak DCS Pro 14n User Manual page 202

Specifications
Host interface
Accessory interface
Removable storage
Orientation sensor
Host software
Lens aperture
Built-in Speedlight
Flash control
Flash Sync mode
Red-eye reduction
Ready light
PC Sync Terminal
Drive mode
Date and time
Power source
Power switch
Exposure meter
Battery power confirmation
Tripod socket
Two-Button reset
A-4
IEEE 1394 (single 400 MB/s port, 1394a-2000 small form factor
interconnect)
NIKON 10-pin compatible accessory interface
1 Type II CF+ compatible CF card, 1 SD/MMC card
Detects ±90° rotation about optical axis
KODAK PROFESSIONAL DCS Photo Desk, KODAK PROFESSIONAL DCS
Camera Manager, KODAK PROFESSIONAL Extended Range Imaging File
Format Module
Instant-return type with Depth-of-Field Preview button
Activated by pressing the Speedlight Lock-Release button, guide number 12
(at ISO 100, m), flash coverage 28 mm or longer lens, ISO range 80 - 800
Controlled by 5-segment TTL Multi Sensor
Front-Curtain Sync, Red-Eye Reduction, Red-Eye Reduction with Slow Sync,
Slow Sync, Rear-Curtain Sync
Yes (AF assist lamp)
Lights up when flash is fully charged with built-in Speedlight
For attaching optional Speedlight
Single frame or Continuous shooting
Date and time is associated with each image file. Can be reset.
KODAK PROFESSIONAL DCS Pro Battery or KODAK PROFESSIONAL DCS Pro
Charger / AC Adapter
Power On and Off positions
Shuts off automatically after 8 seconds if no operations are performed.
Activated by lightly pressing the Shutter Release button.
In Top Status LCD when Exposure meter is on
1/4 inch (JIS standard)
Reset to factory settings
April 29, 2004