Table of Contents
Advertisement
HP ProCurve Switch xl Modules
Specifications
32
Connectors
Twisted-Pair
10/100Base-TX RJ-45 – On the 10/100-TX xl Module.
They are compatible with the IEEE 802.3 10Base-T and 802.3u 100Base-
TX standards and accepts the 10 Mbps or 100 Mbps cables listed on the
next page.
100/1000Base-T RJ-45 – On the 100/1000-T and the 10/100/1000-T
xl Modules.
They are compatible with the IEEE 802.3u 100Base-TX and IEEE 802.3ab
1000Base-T standards, and accepts the 100 Mbps or 1000 Mbps cables
listed on the next page.
1000Base-T RJ-45 – On the 1000Base-T mini-GBIC.
They are compatible with the IEEE 802.3ab 1000Base-T standards, and
accepts the 1000 Mbps cables listed on the next page.
Fiber-Optic
100Base-FX MTRJ – On the 100-FX xl Module.
Transmit sat 1310 nm wavelength, and are compatible with the IEEE
802.3u 100Base-FX standard. They accept the multimode fiber-optic
cables for 100Base-FX described on
Gigabit-SX LC – On the Gigabit-SX mini-GBIC.
Transmits at 850 nm wavelength, and is compatible with the IEEE 802.3z
Gigabit-SX standard. It accepts the low metal content, multimode fiber-
optic cables for Gigabit-SX described on
Gigabit-LX LC – On the Gigabit-LX mini-GBIC.
Transmits at 1310 nm wavelength, and is compatible with the IEEE 802.3z
Gigabit-LX standard. It accepts the low metal content, single-mode or
multimode fiber-optic cables for Gigabit-LX described on
Gigabit-LH LC – On the Gigabit-LH mini-GBIC.
Transmits at 1310 nm wavelength, and accepts the low metal content,
single-mode fiber-optic cables for Gigabit-LH described on
page
34.
page
34.
page
34.
page
34.
Advertisement
Table of Contents
