Manual Tuning - Fm; Display Modes - Fm - Sangean DPR-45 User Manual

Manual tuning – FM
. Press the Standby button to switch on your digital receiver.
. Press and release the Band button to select FM radio mode.
3. Rotate the Tuning control to tune to a station. The frequency will change in steps of 50kHz.
4. When the end of the waveband is reached your digital receiver will recommence tuning from
the opposite end of the waveband.
5. Use the Volume control to adjust the sound level as required.
Display modes – FM
Your digital receiver has a range of display options for FM radio mode.
. Repeatedly press and release the Info button to cycle through the different options.
a. Frequency
b. Station name
c. Program type
d. Scrolling text
e. Time
f . Date
Note:
If no RDS information is available, then the digital receiver will only be able to display the
frequency. There will be no text or program type information available under these conditions.
The digital receiver only provides displays when there is information available. So if there is no
text, for example, that display is not available.
5
Displays the frequency of the FM signal.
Displays the name of the station being listened to
Displays the type of station being listened to such as Pop, Classic,
News, etc.
Displays text messages such as new items etc.
Displays the current time
Displays the current date