Sangean DPR-45 User Manual page 27

When the alarm sounds
The alarm icon will flash at the display when an alarm is sounding. To cancel an alarm, press the
Standby button to return to Stand-by mode.
When the buzzer alarm activates, the alarm will start softly and gradually increase in level. It will
sound for  minute and silence for  minute at the selected time in repetition for up to 30 minutes
unless cancelled. The digital receiver will sound at the selected time for up to 60 minutes for
other alarm types.
Disabling alarms
. To disable a single alarm enters the alarm setup menu and rotate the Tuning control until the
desire alarm is showed on the display. Press the Tuning control to enter the alarm setting menu.
. Rotate the Tuning control until "OFF" is showed on the display, and press and release the
Tuning control to confirm the setting.
3. The display will return to previous mode and the chosen alarm will now be disabled.
Note: To cancel a sounding alarm, simply press the Standby button.
Snooze
. When the alarm sounds, press any button other than the Standby button will silence the alarm
for five minutes. The snooze symbol will appear in the display.
. To cancel the snooze timer while the alarm is suspended, press the Standby button.
GB
6