Clock And Alarms - Sangean DPR-45 User Manual

Clock and Alarms

Automatically updating the clock
Your digital receiver will normally update the clock automatically when tuning to the radio
broadcast. After a power failure the digital receiver will then set its clock the next time that you
turn on the digital receiver in DAB or FM mode. When the digital receiver is in Standby mode, the
clock will be automatically synchronized with DAB radio.
. Press and hold the Menu/ Alarm button to access the menu setting.
2. Rotate the Tuning control till the 'CLOCK' shown on the display. Press the Tuning control to
access the setting.
3. Rotate the Tuning control to select option of 'AUTO CLK'. Press the Tuning control to confirm
the setting.
Manually setting the clock
. Press and hold the Menu/ Alarm button to access the menu setting.
2. Rotate the Tuning control till the 'CLOCK' shown on the display. Press the Tuning control to
access the setting.
3. Rotate the Tuning control to select option of 'MANUAL' shown on the display. Press the Tuning
control to access the setting.
4. The day setting on the display will begin flashing. Rotate the Tuning control to select the desired
date, and press the Tuning control to confirm the setting. Then rotate the Tuning control to
select the desired month, and press the Tuning control to confirm the setting. Then rotate the
Tuning control to select the desired year, and press the Tuning control to confirm the setting.
5. The hour setting on the display will begin flashing. Rotate the Tuning control to select the
desired hour, and press the Tuning control to confirm the setting. Then rotate the Tuning control
to select the desired minutes, and press the Tuning control to confirm the setting.
GB