Manual Tuning - Fm - Sangean DPR-2 Operating Instruction

Manual tuning - FM

1. Press the On/Off button to switch on your radio.
2. Press the Band button to select the FM band. Fully extend the
Telescopic aerial .
3. Rotate the Tuning control to tune to a station. The frequency will
change in steps of 50kHz.
4. When the waveband end is reached the radio will recommence
tuning from the opposite waveband end.
5. Set the Volume, Tone and Deep bass boost switch to the desired
settings.
6. To switch off your radio press the On/Off button.
11
DPR-2_381K701.p65 12 2003/11/19, 上午 10:45