Display And Audio - Sangean DPR-45 User Manual

Display and Audio

GB
Brightness control
The brightness of the display when the unit is in standby mode may be adjusted. If you use the
unit in the bedroom, you may prefer a lower standby brightness level than the standard setting.
. Press the Backlight button so that the display shows for example "LIGHT 4".
. Press the Backlight button one more time to change the standby brightness level. The backlight
level will change at the same time so that you can see the effect of the change. The default
setting after a system reset is 3. Possible brightness values range from 1 – 7.
Headphone socket
A 3.5mm stereo Headphone Socket is provided on the right hand side of your digital receiver for
use with headphones. Inserting a plug automatically mutes the internal loudspeaker.
IMPORTANT:
Excessive sound pressure from earphones and headphones can cause hearing loss.
8