Information - Sangean DPR-45 User Manual

Information

System reset
If your radio fails to operate correctly, or some digits on the display are missing or incomplete
carry out the following procedure.
. Press and hold the Info button to enter Advanced Information.
. Rotate the Tuning button until the display shows "FACTORY". Press and release the Tuning
control so that the display shows "RESET".
3. Press and release the Tuning control again to confirm the reset operation. A full reset will be
performed. The station list and presets will be set to empty. Alarms will be cancelled and timer
and sleep timer settings will be set to their default values. The display will show "NO CLOCK"
and after a few seconds a station scan search will be performed automatically.
Software version display
. Press and hold the Info button to enter the Advanced Information.
. Rotate the Tuning control until the display shows "SW VER". Press the Tuning control again to
show your digital receiver's software information.
3. After a few seconds your digital receiver will return to the normal radio display mode.
9