Sangean DPR-45 User Manual page 26

5. Rotate the Tuning control to choose the alarm hour and then press and release the Tuning
control to enter the hour setting. The alarm minute digits will then flash on the display.
6. Rotate the Tuning control to choose the alarm minute and then press and release the Tuning
control to enter the minute setting.
7. Rotate the Tuning control to choose the required alarm mode, and then press and release the
Tuning control to confirm the setting.
8. Rotate the Tuning control to select the required alarm frequency option when radio mode is
selected. The display will show the frequency options for the alarm. The alarm options are as
follows:
ONCE – the alarm will sound once
DAILY – the alarm will sound everyday
WEEKDAYS – the alarm will sound on weekdays only
WEEKENDS – the alarm will sound only at weekends
Press the Tuning control to confirm the setting.
9. Based on your step 7 selection, the alarm can be set to buzzer, DAB radio, AM or FM radio.
When DAB mode is selected, the radio alarm is set to the station most recently listened to.
When the buzzer is your selection, you will be asked to set your buzzer volume. When the
AM/ FM radio mode is chosen, you will be asked to select a station to wake you up.
Note: When the digital receiver is set to wake by DAB, FM, AM radio, the alarm volume will
be the volume previously listened to.
0. The alarm has now been set. "SAVED" will show on the display, and then will revert to pre-
vious mode.
. To view an alarm setting press and release the Menu button and the display will show "Alarm ".
Press and release the Tuning control to enter the Alarm  setting, and repeatedly press and
release the Tuning control to view through the alarm details.
Active alarms are shown using small alarm indicator at the top of the playing displays and on
the clock display when in stand-by.
5