Sangean DPR-45 User Manual page 28

Sleep timer
Your digital receiver can be set to turn off after a preset time has elapsed. The sleep timer setting
can be adjusted between 5, 30, 60, 90 and 0 minutes.
. To use the sleep timer, press and release the Sleep timer button to enter the sleep timer
setting. "Sleep 5" will appear on the display.
. Rotate the Tuning control to select the desired sleep time. Your digital receiver will switch off
after the preset sleep time has finished.
An active sleep timer is shown using a small sleep timer / snooze indicator at the top of the
playing displays.
3. Use the OFF option to cancel the sleep function. To cancel the sleep function before the preset
time has elapsed, either to set the sleep time to off or press the Standby button to turn the unit
off manually.
Timer function
1. Press and release the NAP button to enter timer setting and rotate the Tuning control to adjust
the minute setting during  and 0 minutes with  minute interval.
2. Press and release the Tuning control to finish the setting and the timer will start to count down,
meanwhile the display will show the remaining minutes. The countdown display will become
normal display after 0 seconds.
3. Press and release the NAP button to view the remaining time for an active timer setting. To
cancel the function when countdown is progressing, press and hold the NAP button until the
timer indicator disappears.
4. Rotate the Tuning control while the display shows the remaining time of countdown to adjust
the required timer setting again.
Note: the digital receiver will sound for 3 minutes when an active timer finishes its countdown.
7