Operating Your Digital Receiver - Search Tuning Fm - Sangean DPR-45 User Manual

Operating your digital receiver – Search tuning FM
. Press the Standby button to switch on your digital receiver.
. Press the Band button as needed until the FM band is selected.
3. Press and release the Auto-tune button to carry out an auto-tune. Your digital receiver will scan
up the FM band from the currently displayed frequency and will stop scanning automatically
when it finds a station of sufficient strength. To scan down the FM band, press and hold the
Auto-tune button.
4. To find more FM stations press and release the Auto-tune button to repeat the scan operation
as DAB stations before.
5. When the end of the waveband is reached your digital receiver will recommence tuning from
the opposite end of the waveband.
6. Use the Volume control to adjust the sound level as required.
GB
4