Fm Stereo / Mono - Sangean DPR-45 User Manual

FM stereo / mono

If the FM radio station being listened to has a weak signal some hiss may be audible. It is
possible to reduce this hiss by forcing the radio to play the station in mono rather than Auto
(stereo).
. Press the Band button as needed to select the FM radio mode display and tune to the required
FM station as previously described.
. Press and hold the Info button to enter the advanced information setting.
3. Rotate the Tuning control to choose the 'Audio' option and then press the same button to
select the option.
4. Rotate the Tuning control to choose the option of 'AUTO' or 'MONO'. Press the Tuning Control
to select your desired option.
GB
6