Exterior Hardware Features - Cisco 1240 Hardware Installation Manual

Router Overview
D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L

Exterior Hardware Features

This section illustrates the router exterior hardware features and includes a brief description of each
feature. Detailed descriptions of each feature are in the
page 2-12
Figure 2-2
1
2
3
Table 2-1 Router Front Exterior Features
Description
1 M8 captive screws (8)
2 Module mounting bosses (6)
3 Module cable ports (2)
Cisco 1240 Connected Grid Router Hardware Installation Guide
2-4
section later in this chapter, or in other chapters in this document.
Router Front Exterior
Detailed Information
Loosen these screws to access the router interior. For information about opening
the chassis, see the chapter
Mount a supported non-Cisco module (optional) to the front exterior of the router
using these mounting bosses. For more information on connecting a module to the
router exterior, see the chapter
Thread cables through these ports, to ports and connectors inside the router, when
installing a module on the router exterior. For more information on connecting a
module to the router exterior, see the chapter
Chapter 2
Hardware Features Detailed Description,
Opening the Router Chassis.
Installing Non-Cisco Modules.
Installing Non-Cisco
Router Hardware Description
Modules.
OL-12345-01