Cover Sheet Registration - Toshiba ESTUDIO170F Operation Manual

Cover Sheet Registration

This function enables the at-
tachment of a cover sheet to
the document being transmit-
ted.
Prior to selecting this function
for the first time, you may wish
to prepare a Cover Sheet im-
age (Logo) to be used on the
cover sheet. See Step 4 of this
procedure.
144
1
Display the COVER
SHEET Menu
Press:
MENU
+
+
+
+
COVER SHEET
2.OFF
1.ON
2
Enable / Disable the
Cover Sheet
Enable or Disable the Cover
Sheet attachment.
(for ON-Enable)
(for OFF-Disable)
When "ON" is selected, the fol-
lowing screen is displayed.
LOAD DOCUMENT
1.YES
2.NO
When "OFF" is selected, the
"COMPLETED" message will
be displayed. The facsimile re-
turns to the Standby Mode.
3
Include an Image on
the Cover Sheet
To include an image (a
scanned company logo, etc.),
press:
(for YES)
If Cover Sheet has already
been registered, the menu
screen for selecting "DELETE"
or "RETAIN" will be displayed.
LOAD DOCUMENT
Go to Step 4.
To omit an image on the cover
sheet, press:
(for NO)
When "NO" is selected, the
"COMPLETED" message will
be displayed. The facsimile re-
turns to the Standby Mode.
Image Area
4
Load the Image
Document
Load the image document to be
included on the cover sheet.
NOTE:
In preparing a document for
your cover sheet image,
only a limited area of the
sheet will be included as
shown below. Any data out
of the specified range will
be disregarded.
Effective
5.9 in.
Range ( 150mm )
Feed
Direction
When the document is pulled
into the appropriate position,
the following screen is dis-
played.
PRESS [START]
Press:
START
When scanning is complete,
the facsimile returns to the
Standby Mode.