8-4-3Manual Accumulation; 8-4-4Accumulation Display - Jadever JCAII User Manual

Note: You can change the max accumulation back to 50 times by repeating the above steps.
It will beep for 3 seconds when accumulate to the max account (eg. Max accumulation=9) and the
is blinking
Under this condition, you have the following options:
 Press
, it will print every set and total,
SH-24. Label printer could not do it.)
 Press
to return to normal weighing mode, and still keep accumulation.(But if you try to
accumulate another set, it will appear
 Press
twice to delete all accumulation,
8-4-3 Manual Accumulation
1. Put the article on the pan. Press key
window. This is the first accumulation.
2. The symbol will appear pointing at the "
3. Repeat step 1.
4.Press to return to normal weighing mode.
8-4-4 Accumulation display
1.Press to see the last accumulation value.
2. Press once more to see the total accumulations value.
3.After the above two steps, press
4.Skip 2-3 steps, press any numeric key to see a certain accumulation. For example, if you want to
th
see the 12 accumulation, press key
5.Press to return to normal weighing mode.
is still blinking. (It is only for normal printer
to warm)
. The symbol "
" after the blinking.
again, it will display every accumulation value one by one.
.
" is blinking in the Unit Weighting
V03
JCAII 12