Table of Contents
Advertisement
1.
Remove the glass door, grate bar assembly, and firebox baffle.
2.
Tilt the Rear Brick Panel backward and position it against the back firebox wall. The panel can be secured by folding down
the two tabs inside the top of the firebox.
3.
Tilt the side panels into the firebox as shown, and ask for assistance to help hold them in place. Ensure the side panels
are positioned firmly against the back brick panel and against the side of the firebox wall. Use caution when handling
these liner panels as they are fragile. Use the supplied brick clips to secure the Side Brick Panels in place.
4.
Reinstall the baffle using its original screws. NOTE: When reinstalling the baffle, ensure that the integrity of the firebox is
not compromised. The firebox must remain airtight. Use high-temperature Millpac to reseal if necessary.
5.
Reinstall the grate bar assembly.
6.
To remove simply reverse these steps.
Parts List
Part No.
MQ3927RLT, MQ4634RLT
MQ3927RLH, MQ4634RLH
MQ3927RLS, MQ4634RLS
Brick Liner Panel Installation Guide
Description
Refractory Liners – Traditional
Refractory Liners – Herringbone
Refractory Liners – Sand Stone
Contents
1ea. Rear Brick Panel
1ea. Left Side Panel
1ea. Right Side Panel
Figure 10 - Brick liner installation guide.
16
Hide quick links:
Advertisement
Table of Contents
