Marquis Cove MQZDV3927N Installation Instructions Manual page 26

Pilot Removal Guide
1. Remove logs and grate bar assembly. Please refer to Figure 16 for illustration.
2. Remove screws from Pilot Assembly and Pilot Access Cover Plate.
3. Undo pilot connections. Remove Pilot Assembly. Do not discard Pilot Access Cover Plate.
4. Installation is the reverse of these steps. Reseal pilot connections to cover plate with orange silicone and cover plate to
burner pan with black Millpac.
Valve Removal Guide
1. Remove the right access panel (see page 17).
2. Remove the mounting screw attaching the upper valve bracket, and lift the valve assembly to disengage the mounting
hook.
3. Gently remove the valve assembly outside of the fireplace cavity. Ensure that the electrical and plumbing connections are
not damaged. Remove all electrical and plumbing connections to the valve.
Installation is the reverse of these steps. NOTE: Only one [1] mounting screw is required.
4.
Figure 16 - Burner tube removal guide.
Figure 17 - Valve mounting assembly (IPI model shown).
26