Step 3: Place Log 4 on the right ember plate next to Log 2 as
shown. Do not cover the rear burner tube.
Log 6
Step 5: Place Log 6 and Log 7 on the grate bar as shown
above.
Log 3
Log 2
Log 4
Step 4: Place Log 5 on top of the left ember plate behind
Keep Pilot Shield Area
Clear.
Log 7
Step 6: Add lava rock to the bottom of the burner pan. Add
Tab 3
Tab3. Groove in Log 5 must rest on Knot in Log 2, as
above.
glowing embers to the top of the ember plates and
front burner tube. Sprinkle vermiculite over the lava
rock. Do not place any media within Pilot Shield
Area (see above).
Log 5
(Groove)
Log 2
(Knot)
24