Physical Installation - SeaLevel ACB-MP+4.PCI User Manual

Physical Installation

The adapter is universal bus compatible and can be installed in any 3.3V or 5V PCI
expansion slot.
1. Turn off power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank metal slot cover.
4. Gently insert the PCI adapter into the slot. Make sure the adapter is seated
5. Replace the screw (required for FCC Part 15 compliance).
6. Replace the cover.
7. Connect the power cord and power up the machine.
The ACB-MP+4.PCI is now ready for use.
© Sealevel Systems, Inc.
Do not install the adapter until the software has been
successfully installed..
properly.
- 4 - ACB-MP+4.PCI User Manual