Table of Contents
Advertisement
Physical Installation
The adapter can be installed in any PCI (5V or 3.3 V) expansion slot.
Do not install the Adapter in the machine until the software has been fully installed.
1.
Turn off PC power. Disconnect the power cord.
2.
Remove the PC case cover.
3.
Locate an available PCI slot and remove the blank metal slot cover.
4.
Gently insert the PCI adapter into the slot. Make sure that the adapter is seated properly.
5.
Replace the screw. (This is required to ensure FCC Part 15 compliance.)
6.
Replace the cover.
7.
Connect the power cord
Installation is finished.
Sealevel Systems ULTRA COMM+I.LPCI
Installation
Page 7
Advertisement
Table of Contents
