Mounting Points; Mounting Position - Elation Design LED 60 Strip WA Manual

Hide thumbs Also See for Design LED 60 Strip WA:

Table of Contents

Design LED 60 Strip WA™

Mounting points

Overhead mounting requires extensive experience, including amongst others calculating

working load limits, a fine knowledge of the installation material being used, and periodic

safety inspection of all installation material and the fixture. If you lack these qualifications,

do not attempt the installation yourself. Improper installation can result in bodily injury.

Be sure to complete all rigging and installation procedures before connecting the main

power cord to the appropriate wall outlet.

Mounting Positions

The Design LED 60 Strip WA™ is fully operational in different mounting positions, hanging

upside-down from a ceiling, side mounted, or set on a flat level surface. Be sure this fixture

is kept at least 0.5m away from any flammable materials (decoration etc.). When clamp

mounting; always use and install the supplied safety cable as an added safety measure to

prevent accidental damage in the event of a clamp failure. See the image below.

www.ElationLighting.com

Table of Contents