Dmx Indicator - Elation Design LED 60 Strip WA Manual

Design LED 60 Strip WA™
This unit will keep and retain the last DMX command in the event of DMX signal failure. To
reset the fixture you must turn the power off.
DMX LED Indicator:
The fixture has an LED indicator located by the dipswitches. This indicator has two
functions as detailed below;
1) LED flashing green = No incoming DMX signal, fixture will function in stand-alone mode.
Use the dipswitches to adjust the manual settings.
2) LED Solid Green = Fixture is receiving a DMX signal and will function in DMX mode. Use
the dipswitches to set the DMX address.
©Elation Professional, Los Angeles Ca. 19 www.ElationLighting.com