Elation Design LED 60 Strip WA Manual page 18

Hide thumbs Also See for Design LED 60 Strip WA:

Table of Contents

Design LED 60 Strip WA™

fixture.

In the case of the Design LED 60 Strip WA™, which is a 4 channel fixture (default),

you should set the starting DMX address of the first unit to 1, the second unit to 5 (4

+ 1), the third unit to 9 (4 + 5), and so on. The chart on page 24 details the proper starting

DMX address dipswitch setting combination.

NOTE: The Design LED 60 Strip WA contains a total of 12 dipswitches. Only use

dipswitches 1~9 to set the DMX address. Dipswitches 10~12 are used for special

functions that will be explained on the next page.

www.ElationLighting.com

Table of Contents