Design Wash 300E™
Mounting points
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, a fine knowledge of the installation material being used, and periodic
safety inspection of all installation material and the fixture. If you lack these qualifications, do
not attempt the installation yourself. Improper installation can result in bodily injury.
CAUTION!
Be sure all electrical connections are performed by a qualified
electrician.
Be sure to complete all rigging and installation procedures before connecting the main
power cord to the appropriate wall outlet.
Clamp Mounting
™
The Design Wash 300E
provides a unique mounting bracket assembly that integrates the
bottom of the base, the included "Omega Bracket," and the safety cable rigging point in one
©Elation Professional, Los Angeles Ca.
16
www.ElationLighting.com