Set The Blood Glucose Test Strip Code; Figure; User Info/Support - Insulet OmniPod User Manual

Keep the blood glucose test strip vial away from chil-
dren. The cap is a choking hazard. The cap or vial
contains drying agents that may be harmful if inhaled
or swallowed and may cause skin or eye irritation.

Set the blood glucose test strip code

After you insert the strip, the PDM displays a code number
(Figure 7-19). This number must match the code on the side of
the vial.

Figure 7-19

Up/Down Controller
Checking Your Blood Glucose
Figure 7-20

User Info/Support

To change the code number, press the Up/Down Controller
button until the number matches the number on your vial. The
numbers are between 1 and 50.
If you do not adjust the code number within 2 seconds, the next
screen appears automatically (Figure 7-20).
If you need to adjust the code number after the PDM
has moved to the next screen, just press the Up/Down
Controller button. The code screen reappears and you
can adjust the number.
To ensure accurate test results, always make sure the
code number on your PDM matches the large num-
ber on the side of the vial.
Blood Glucose Records
7
79