The Omnipod Setup Wizard; Set Date And Time; Enter Basal Settings - Insulet OmniPod User Manual

■

The OmniPod Setup Wizard

The first time you turn on the Personal Diabetes Manager, the
Setup Wizard comes on automatically. Although setup is easy
with the Wizard, if you are a first-time user, your healthcare pro-
vider must guide you through the process. Setup takes only a
few minutes and is easy to do:
• Use the Up/Down Controller button to increase or decrease
a number or to move up or down a list.
• Press the soft key labeled Next, Select, or Done to continue
to the next screen.
• Press Back to return to the previous screen.
You can adjust these settings later as your needs
change or you fine-tune your OmniPod System. See
"OmniPod System Options and Settings" in the
Appendices.
The Wizard's Welcome screen (Figure 2-3) gets you started. Press
Next to begin setting up your PDM.

Set date and time

1. Use the Up/Down Controller button to increase or decrease
the time. (If you prefer a 24-hour clock, press 12/24hr.) Then
press Next.
2. Enter the current year, then press Next.
Up/Down Controller
Figure 2-3
3. Choose the current month, then press Next.
4. Enter the current day, then press Next.
5. Choose the date format you prefer, then press Next.

Enter basal settings

1. Choose a maximum basal rate, then press Next. (The default
maximum basal rate is 3 U/hr.)
2. Choose the initial basal rate to use, then press Next.
The initial basal program created with the Setup Wizard is
named basal 1. You can change the name in the Settings >
Basal programs menu (see Chapter 3, Understanding and
Adjusting Basal Rates).
User Info/Support
Getting Started
Blood Glucose Records
2
11