Insulet OmniPod User Manual page 33

c. Enter each character one at a time. For example, if your
weekend schedule is different from your weekday sched-
ule, you might enter W, e, e, k, e, n, d (Figure 3-3). (A blank
character or space is the first and last option in the scroll-
ing menu.)
Figure 3-3
d. Press Next.
As a safety feature, the words "Invalid basal program
name" (Figure 3-4) appear if the name you entered
does not have at least one character or if the name is
being used for another basal program. Press OK to
return to the previous screen and enter a different
name.
Up/Down Controller
Understanding and Adjusting Basal Rates
Figure 3-4
User Info/Support
5. Enter the rate, in U/hr, for the first basal segment (from 0.05 to
the maximum you entered during setup), then press Next.
6. Review the list showing your new basal program.
To use the same basal rate for the entire 24-hour program,
press Done and continue with step 7.
Or, to add basal segments and rates (for example, a higher
basal rate between 8:00 am and 3:00 pm):
a. Choose an existing basal segment, then press Edit.
Or, choose [add new], then press New.
b. Enter the start time (for example, 8:00 am), then press
Next. Basal segments are in 30-minute increments.
c. Enter the end time (for example, 3:00 pm), then press
Next.
d. Enter the rate for the new basal segment (for example,
0.80U/hr), then press Next.
Basal rates outside the changed segment do not
change.
e. Repeat steps a–d for each new segment and rate you
want.
f. Press Done.
Blood Glucose Records
3
19