2
Getting Started
■
Set Up the Personal Diabetes Manager (PDM)
Chapter 6 describes the PDM options in detail. The instructions
in this chapter are simplified to help you get started.
Turn on the PDM
1. Open the battery compartment on the back of the PDM by
pushing the compartment latch inward and then upward
(Figure 2-1). No special tools are necessary.
Figure 2-1
10
Figure 2-2
Home
2. Insert two (2) new AAA alkaline batteries into the compart-
ment.
The diagram inside the compartment shows you which
direction to insert the batteries (Figure 2-2).
Use only new AAA alkaline batteries to power the
PDM. Never use old or used batteries; the PDM may
not work properly.
3. Replace the battery door.
4. Turn the PDM face-up. The PDM will power-on automatically.
Food Library
Power/Backlight
Need help?
Do you have a question about the OmniPod and is the answer not in the manual?