Changing bulbs (vehicles with halogen headlamps)
132
High-beam headlamps
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
X
and pull it out.
Turn bulb holder ; counter-clockwise and
X
pull it out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
X
it clockwise.
Align housing cover : and turn it clock-
X
wise until it engages.
Turn signal
Remove the cover in the front wheel hous-
X
ing (
page 131).
Y
Turn housing cover : counter-clockwise
X
and pull it out.
Turn bulb holder ; counter-clockwise,
X
unlock it and pull it out.
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
X
it clockwise.
Align housing cover : and turn it clock-
X
wise until it engages.
Replace the cover in the front wheel hous-
X
ing (
page 131).
Y
Changing the rear bulbs
Opening and closing the side trim pan-
els
Example: right-hand side trim panel
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
To open: release right or left side trim
X
panel : at the top and fold it down in the
direction of the arrow.
To close: insert side panel :.
X
Tail lamps
Switch off the lights.
X
Open the trunk.
X
Open the side trim panel (
X
page 132).
Y