Opening And Closing The Roller Sun-Blinds; Resetting The Panorama Roof With Power Tilt/Sliding Panel - Mercedes-Benz C-Class Operator's Manual

Opening and closing the roller sun-
blinds
Overhead control panel
To open
:
To open
;
To close
=
You can only close the roller sunblinds when
the panorama roof with power tilt/sliding
panel is closed.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock ( page 157).
Y
Press the 3 switch in direction :.
X
Both roller sunblinds open, then the pano-
rama roof with power tilt/sliding panel is
raised.
Pull the 3 switch in direction ;.
X
The sunblinds open
Pull the 3 switch in direction =.
X
The roller sunblinds close when the pano-
rama roof with power tilt/sliding panel is
closed.
If you press or pull the 3 switch beyond
the point of resistance, automatic operation
is started in the corresponding direction. You
can stop automatic operation by pressing or
pulling again.
Resetting the panorama roof with
power tilt/sliding panel or the front
roller sunblind
Reset the panorama roof with power tilt/slid-
ing panel or the front roller sunblind if the
panorama roof with power tilt/sliding panel
or the roller sunblinds does not move
smoothly.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock ( page 157).
Y
Pull the 3 switch repeatedly to the point
X
of resistance in the direction of arrow :
until the panorama roof with power tilt/
sliding panel is fully closed.
Keep the 3 switch pulled for an addi-
X
tional second.
Pull the 3 switch in the direction of
X
arrow : repeatedly until the front roller
sunblind is closed.
Keep the 3 switch pulled for an addi-
X
tional second.
Make sure that the panorama roof with
X
power tilt/sliding panel (
the front roller sunblind (
be fully opened again.
If this is not the case, repeat the steps
X
above again.
Sliding sunroof
page 103) and
Y
page 105) can
Y
Z
105