Exiting 360 Degree Camera Display Mode - Mercedes-Benz C-Class Operator's Manual

Top view with picture from the mirror
camera
Symbol for the top view and forward-
:
facing mirror camera setting
Yellow guide line for the vehicle width
;
including the exterior mirrors (right side of
vehicle)
Yellow guide line for the vehicle width
=
including the exterior mirrors (left side of
vehicle)
i
You can also select the mirror camera
setting for the rear-facing view.
Wide-angle function
Symbol for the full screen setting with rear
:
view camera image
Own vehicle
;
PARKTRONIC warning displays
=
If the vehicle is equipped with PARKTRONIC
and the function is active (
ing displays = in the COMAND display are
also active or light up accordingly.
page 201), warn-
Y
Driving systems
PARKTRONIC appears:
in split screen view as red or yellow brack-
R
ets around the vehicle icon in the top view,
or
in the full screen view, on the right-hand
R
side at the bottom as red or yellow brackets
around the vehicle icon
i
The full screen display can also be selec-
ted as front view.
Select this view when you are driving out of an
exit and the view of crossing traffic is restric-
ted, for example.
i To select split-screen view, select the
% symbol in the display then confirm
with the COMAND controller.
Object detection
The 360° camera helps detect moving and
stationary objects. If an object (person, vehi-
cle, other obstacle) is detected, this object is
marked with a bar. Objects located some dis-
tance from the vehicle away are marked with
a yellow bar. If the distance to the object is
very small, the bar is displayed in red.
Object detection only functions in both full
screen modes.
To ensure that you can use the function, it
must be switched on in COMAND (see the
separate operating instructions).
Exiting 360° camera display mode
As soon as the vehicle exceeds a speed of
19 mph (30 km/h), the function switches off.
The view which was active before the 360°
camera was displayed appears in the
COMAND display. You can also stop the 360°
camera display from split-screen view by
selecting the % symbol in the display and
then confirming with the COMAND controller.
Vehicles with automatic transmission: the
360° camera display is also ended if you
select transmission position P.
215
Z